ForensicFlare Light
The Next Generation ALS
New and Improved Design
ForensicFlare Light is designed and engineered by the original manufacturer behind the acclaimed Polilight Flare +2 and is now ready to be introduce to the market. ForensicFlare Light is a state of the art forensic light source with more power, an efficient battery and an even more intense light beam compared to previous models and competitors.
Focusing the beam through the high-quality optics makes the light more uniform and the intensity of the center is higher than any other ALS. The consistency and intensity of the beam increases the effectiveness of detecting evidence and photography results.
High Powered
ForensicFlare Light is brighter than any other handheld ALS battery system and is powered by a new multicell li-ion battery which provides several hours of bright light. The increased intensity is visible to any professional comparing the ForensicFlare Light to its predecessor and the closest competitors.
The latest generation of LEDs provides the best source of light, the li-ion battery delivers long and reliable power and the high quality optics creates the best performing forensic light possible and is why the ForensicFlare Light is the best Alternative Light Source on the market.
Ease of use
It will come as a surprise for most first-time users to see how powerful the ForensicFlare Light is compared to its size. The small size and low weight might be deceiving but the ForensicFlare Light provides a more intense beam of light compared to its predecessors.
Ergonomic designed to fit perfectly in your palm and easy to carry around. The ForensicFlare Light is activated with a slider-button and turns on instantly without any delay. The lightweight design makes it easy to use without worrying about hand fatigue and makes it extremely portable even when the full assortment of ForensicFlare Light is accompanying you on your assignment.
MEET THE
Impressive Features
Increased Power
Increased power provides higher intensity and gives you the capability to detect evidence previously to hard to detect.
User Friendly
ForensicFlare Light is very easy to operate. The slider activates the light and and turns on instantly. No time wasted.
Compact
With its compact size of only 168 cm (6.6″) and a low weight of 540 grams (19oz) it is easy to carry wherever you go.
New battery
The high-quality li-ion battery will power the ForensicFlare Light for hours of work – even at the highest intensity.
Focused beam
The pat. pending. optics focuses the light into a high-powered beam with an unprecedented high Lux-value.
Durable
ForensicFlare Light is made of high quality and very durable materials and can accompany you in any weather condition.
Choose the best
variant for the task
ForensicFlare is available in 4 different variants.
Each variant is as powerful as the other and with our selected variety of possibilities the crime scene investigator or Lab technician will have the best possible conditions when working.
UV
365nm
PURPLE
415nm
CYAN
505nm
WHITE
400 - 700nm
UVA
365nm
PURPLE
445nm
CYAN
505nm
WHITE
400 - 700nm
Choose the best
variant for the task
ForensicFlare is available in 12 different variants covering the full light spectrum from Ultraviolet C (UVC) to Infrared (IR) light light.
Each variant is as powerful as the other and with the large selection of possibilities the forensic professional will have the best possible conditions to find the undetectable.
UVC
265nm
UV
365nm
PURPLE
415nm
BLUE
450nm
CYAN
505nm
GREEN
530nm
YELLOW
545nm
ORANGE
595nm
RED
620nm
UVC
265nm
UVA
365nm
PURPLE
415nm
BLUE
450nm
CYAN
505nm
GREEN
530nm
WHITE
400 - 700nm
IR
850nm
IR
935 - 965nm
YELLOW/GREEN
545nm
ORANGE
595nm
RED
620nm
WHITE
400 - 700nm
INFRARED
850nm
INFRARED
935 - 965nm
Ready to pre-order?
Are you ready to pre-order the ForensicFlare Light?
Be the first in your field to apply the latest forensic light technology with the most intense ALS on the market.
BarrierCone
Filter barrier system
ForensicFlare Light is the first forensic light to introduce the efficient BarrierCone system.
The BarrierCone system is a quick and efficient alternative to other bandpass filters and makes it easier to use bandpass filter on a forensic light.
Attach the BarrierCone system on your ForensicFlare Light and you will have a high quality bandpass filter to eliminate unwanted light. The FilterCone system can replace alternative bandpass filters such as goggles, sheets of plastic etc.
The FilterCone is attached on the front of the ForensicFlare Light with a intuitive magnet system and can be detached quickly if desired. The BarrierCone system comes in 4 colors, Transparent, Yellow, Amber and Red.
Use the BarrierCone to block undesirable wavelengths from the target area and increase the efficiency of detecting evidence and photography results.
Compatibility?
We got you!
In our effort to provide the best service to forensic light users we have prioritized backwards compatible with third-party accessory made for the Rofin Polilight Flare Plus 2, as we want to reduce unnecessary waste and recycle usable accessories and understand the frustration of acquiring new accessory when switching to a new light system.
ForensicFlare Light
Specifications
540 Grams (19oz)
Head diameter 74 mm (2.9”)
Body diameter 46 mm (1.8”)
Overall length 168 mm (6.6”)
– Multi-function reed switch collar
– On/Off
– Adjustable intensity output (12steps)
- – Magnet click-on system
– Strobing
– SOS
– Airplane lock mode
– Activation sequence
– UVC with safety Auto-lock
- 265nm – UVC
- 365nm – UVA
- 445nm – Purple
- 450nm – Blue
- 505nm – Cyan
- 530nm – Green
- 545nm – Yellow/Green
- 595nm – Orange
- 620nm – Red
- 850nm – Infrared
- 935 to 965nm – Infrared
- 400 to 700nm – White
27 Watts
5500 Lumens
9º Full Angle.
50% Intensity = 240 min.
100% Intensity = 120 min.
- – Charge time from 0-100% = 60 minutes.
- – Charging indicator
- – Charge time indicator
- – Charge direction = Horizontal and Vertical.
Rechargeable, Li-ion Battery, 11.1 Volts, 3.4 amp
-10°C to +60°C; 45-95% RH (14°F to 140°F)
Use ordinary cleaning detergent or rubbing alcohol.
Anodized Aluminum with TPFE self-healing anti corrosion coating and silk coated high quality plastic.
IP65 Rating
CE, UL & RoHS
– BarrierCone (Transparent, 450, 460 & 490).
– Beam shaping filters (5°, 10°, 20°, 50° & 60×1°)
– Bandpass Filters
– Gloves
– Goggles
– Charge dock
– Power cable 12V/ 220V/110V AC
– Carry Case w/ built in charger
*Accessories can be additional purchase
